• Sunday , 7 June 2020

3D Printing Tutorial #2 – Modeling a real object for printing using blender

Code Canyon

https://i.ytimg.com/vi/-6J0gjYCOCM/hqdefault.jpg



Sorry for sounding like a weirdo, but I was just coming off of a cold. Anyway, this is part 2 of 3D printing, start to finish. In this tutorial, I will show you how to model a real world object, an angle bracket for joining two pieces of 8020 extrusion at a 90 degree angle, how to put holes in your model, as if to produce holes that were drilled.

Be sure to visit solar1.net

source

3d Ocean

Related Posts

15 Comments

  1. drnicholasb
    March 24, 2018 at 13:00

    then how do i make it able to 3d print? .stl or .gcode

  2. Avalyn Cosplay
    March 24, 2018 at 13:00

    Thank you for this tutorial! I am new to Blender and 3-d modeling but I am trying to learn so I can create custom pieces (like buckles) for costumes. This is the first tutorial I have watched after the Blender introduction videos and it was really easy for a newbie like me to follow.

  3. Daniel P. G.
    March 24, 2018 at 13:00

    I don't know how old this video is but blender has the option to use metrics. Including the crazy American units.

  4. getenlightened
    March 24, 2018 at 13:00

    The 'blender units' issue is a bit of a turn off for me. I realize you can set metric actually, but when I tried creating mm sized parts, they were too tiny for the work space really.
    Question: How did you make sure your 'blender units' part was true to life scale when you printed it? Did you have to rescale it in another program before printing?

  5. alcurb
    March 24, 2018 at 13:00

    Question: Did you print and build anything with the extrusions?  I like to see what they look like in plastic.

  6. alcurb
    March 24, 2018 at 13:00

    Suggestion: when you refer to a key-press combo, put a little label overlay or bubble on the video stating the key press (e.g. "Ctrl-P"). I missed one or two of them when you said them quickly and I had to review a couple of times to get it.

  7. alcurb
    March 24, 2018 at 13:00

    Very nice tutorial. I do look forward to your other 3D printing videos.

  8. Hecano
    March 24, 2018 at 13:00

    R u british

  9. DestructionGaming
    March 24, 2018 at 13:00

    Hi I REALLY NEED YOU TO ANSWER THIS QUESTION… okay so i need to do 2 things for what i am building, i need to make a cup… i have added a cylinder, but i dont know how to hollow out the inside… i also need to add a rectangle that i can cut the corners off to make a slant at the end of the rectangle…. HOW WOULD I DO THIS?

  10. Who ya think
    March 24, 2018 at 13:00

    Thanks for the info, but if your going to make more videos, please buy a new mic! The clicking is very annoying and is taking away from your great tutorial. It seems to be in all of your blender videos!

  11. Hawk1991-Gameing
    March 24, 2018 at 13:00

    Doing in blender what would take 60 seconds ind 123d design lol

  12. HurtfulProductions
    March 24, 2018 at 13:00

    Is there a part 3 to this?

  13. Jody Harris
    March 24, 2018 at 13:00

    These videos are helpful. Please keep going!

  14. Gareth Crispin
    March 24, 2018 at 13:00

    thanks for this, much appreciated! 🙂

  15. Red Harrell
    March 24, 2018 at 13:00

    Thanks!

Leave A Comment

You must be logged in to post a comment.