Printing professional-quality images can be an intimidating task if you are new to it. However, it doesn’t need to be overly complicated. By following a few simple steps you can easily create high-end prints ready for your walls or print sales.
Have you ever wanted to print your photographs but got confused by dimensions, resolution, resampling, and all the other technical terms associated with the process? Maybe you’re not sure if you should add a border or how to even do so? We’ve all been there! This article will show you how to tackle the seemingly challenging task of getting a professional, physical print of your photographs.
Printing images seems to be far less common these days than it was back in the age of film. With the various forms of social media, digital picture frames, and other such platforms, printing can appear to be unnecessary. But, printing your photographs can provide a new (and at times better) way of looking at your work and is an extremely valuable thing to do for a variety of reasons. It could also give you an avenue to make money off of your photography by selling prints! While there are plenty of websites out there that allow you to print without thinking about resizing or adding borders, most are not going to provide as professional results or as much flexibility as companies that do require you to resize to what you want a final print to be.
Before diving in, I want to point out that all of the screenshots and tips I provide below are from Adobe Photoshop. That is where I do all my work in regards to getting an image ready to print. There are other options out there, of course, but this article is going to be focused on how to get an image ready to print in Photoshop.
Terms to Know
Resizing Versus Resampling
Resizing versus resampling is probably the most confusing part of the printing process, so let’s get this beast out of the way. Knowing when to choose which one can be enough to make you decide to give up on the whole thing. Hopefully, I can offer a slightly simplified and straightforward explanation here.
Photoshop actually defaults to having the Resample box checked when you first open the Image Size window, which means that if you have ever resized an image without changing that, you are technically resampling, not resizing. Resampling means that you are changing the total number of pixels in an image. If you increase the size of an image with the Resample box checked, you will be upsampling an image, which means that Photoshop will add in new pixels based on what is in the image. If you decrease the size with Resample checked, called downsampling, Photoshop will delete pixels. There are a few options for how Photoshop makes the decisions on how to add or delete pixels, which is called interpolation, but more on that later.
Resizing, on the other hand, changes the image size without changing the number of pixels in the image. Photoshop isn’t adding or subtracting any data or pixels when you have that box unchecked and is instead redistributing the existing pixels to fit in a smaller or larger image area. In fact, when you uncheck that box, you will notice that the ability to change the pixel dimensions is grayed out. You can change the resolution and the document size in inches, centimeters, et cetera, but you cannot change the pixel dimensions. You will also notice that if you change the document size with the Resample box unchecked, that the resolution will automatically change. The opposite is true as well; if you change the resolution, Photoshop will automatically adjust the image width and height to preserve the total number of pixels.
If you want to maintain the absolute highest quality, unchecking the Resample option is best. You will always have some loss of quality when adding or removing data from an image, so to maintain the sharpest, clearest print, uncheck that box. There are times you will want to have Resample turned on, but we will get to that in a bit.
Resolution is essentially the amount of detail in an image and as a result, is one of the more important things to pay attention to when ordering prints. When it comes to printing, the resolution is simply the number of dots that will print in one linear inch and is referred to as dpi (dots per inch). Photoshop will show this as ppi (pixels per inch), but it effectively means the same thing. The industry standard for printing and the native resolution for most professional printers are 300 dpi, so you will want to make sure that your image resolution is also 300 dpi.
If your photographs are less than 300 ppi, you can increase the resolution for better prints. But, in doing this, you will reduce the maximum size that you can print at while still maintaining the original quality, so be aware of that.
Before doing anything, I prefer to flatten my images in Photoshop. Layers can just get annoying or even get in the way of some of the steps, so I like to work with a single layer when prepping an image for printing. It isn’t a necessity but is the workflow that has worked best for me.
Aspect Ratio and Cropping
The first thing that you should do when getting ready to print is to determine and crop to your desired aspect ratio. If you are buying a premade frame, you will want to make sure that your print has the same aspect ratio as the frame so that the print fits properly and important parts of your image aren’t getting cut off or put in a weird spot within the frame. If you are going to be making your own frame and cutting your own mat, or even going without a frame entirely, then you can go with whatever aspect ratio makes the most sense for that particular image!
When it comes to cropping the image, Photoshop has the most common aspect ratios preset in the crop tool, making it easy to get the right one. That said, the aspect ratios listed are the reduced-down ratios. If you are getting a larger frame/print, you either need to do some math to figure out the aspect ratio, or you can put your own dimensions in to skip the math.
After cropping you will want to resize your image. When choosing an image size, you need to consider what is possible in terms of going larger than the original size of your photograph. Increasing the size of an image will result in quality loss, so deciding what is an acceptable loss of quality is essential. With larger prints, viewers are generally standing farther back, so the quality loss may not be a huge deal and a lower ppi is acceptable. But, if you are printing an image for a gallery show, where people are likely going to look at the print up close, you will want to avoid as much quality loss as possible and may be limited on how big you can print as a result. It’s all about balance, really. There are plenty of charts out there that tell you how big you can print a given image based on ppi and pixel dimensions, so I’m not going to regurgitate that here, but be aware that there are limitations if you want to maintain a totally sharp image without artifacts. If pristine sharpness when viewed up close isn’t a concern for you, then really, the sky is the limit (okay, maybe not that big).
To resize your image, open your photograph in Photoshop and then pull up the Image Size menu. Start by unchecking that Resample box, and then, put in the dimensions that you want. Let’s say that I want to make a 16×11 inch print. In this example, my resolution is at 300 dpi direct from my camera, and my document size is larger than 16×11 inches. Because I have Resample unchecked, the resolution is going to jump up when I change the print size to 16×11. That’s totally fine, and you can leave that as is and simply hit OK.
If, however, you are making your print larger than what the original size was, you will need to follow a few more steps. Let’s say that I want to make a 36×24 inch print. With Resample unchecked, the resolution goes lower than what I would like for printing. So, after putting in the dimensions I recheck Resample and put in 300 for resolution. You will see the pixel dimensions, as well as the file size, get larger, but the document size (the measurement in inches) will stay the same. When it comes to choosing the interpolation method (how Photoshop decides to add pixels), you can either leave it on Automatic or play around to figure out which works best for a particular image. You can also do some slight noise reduction at this point, but keep it minimal or you will have even more loss of sharpness.
Depending on where you are ordering prints, you may need to decide if you would like to add a border. The printing company I use does not automatically add a border, so if I want one I need to plan ahead and create it myself. A border isn’t a necessity, so you can just order without if you prefer. I personally like a border if I am matting and framing a print, as it helps prevent any fingerprints on the image, makes it easier to hide photo corners if you are using those, and just in general makes the print easier to work with. You could also use a border in place of using a mat if you don’t want your print going all the way to the edge of the frame but don’t want to deal with matting.
The exact process of adding a border depends somewhat on your printing company, so be sure you check with them first. With WHCC, the company that I use, I need to order a larger print than what I want the actual image size to be and place the image on that larger canvas size to achieve a white border. To do this, I first go through the steps for cropping and resizing the image, as outlined above. If I need the print to be a 12×8 inch print, the document size should be 12×8 inches before I start the process of adding a border. Then you need to decide on how thick your border is going to be.
If you want to have a specific thickness to your border, perhaps because you are using a border instead of adding a mat, then some math will be necessary to figure out the final print size. To figure this out, multiply your desired border width by two and add that to both the height and width to figure out what the print size needs to be. For example, let’s say you want a two-inch border. Because you need two inches on each side, you would need to add four inches to both the width and height to figure out what your canvas size should be. In the example of a 12×8 inch print, your canvas size, or the final print size, would need to be 16×12 inches in order to have a two-inch border. With WHCC, I have to stick with one of their standard sizes, and since they don’t have a 16×12 option, I would have to go with an 18×12 print size and either trim off the extra or just leave it and make sure it is centered in a frame or mat.
If you know what final print size and border width you want and are trying to figure out the image size, simply take your border width multiplied by two, and subtract it from the final print size. So, in the 16×12 with a two-inch border example, you would take 16-4=12 and 12-4=8, leaving you with a 12×8 image area.
To add the border, go to Image > Canvas Size. Since I use inches for my measurements, I change the option to inches and put in the outside edge dimensions that I need, so in this case 18×12, and hit OK. If you do not want your actual image to be centered within the border, you need to make the background image a layer before changing the canvas size. This will allow you to move the image to wherever you would like it placed.
The most important thing when ordering prints is that you take your time and be sure of the things that you select. Prints, especially when you get into larger sizes and surfaces other than basic photographic paper can get very expensive, and making a mistake in image size, resolution, or aspect ratio can result in wasted money and potentially an upset customer if you are selling prints. Good printing companies will hopefully be extremely communicative and get ahold of you if something seems off, but taking the time to double or even triple-check everything is best. Also, be sure that you thoroughly review your printing company’s recommendations for file types and sizes, and any other requirements they may have. All companies are slightly different, so know what is expected before ordering any prints.
Beyond the technical parts of ordering prints, you may also want to mat and frame a print on your own. I will have a separate article on that, so stay tuned!