• Saturday , 30 May 2020

Modeling Car Rims in Blender

Code Canyon

https://i.ytimg.com/vi/TAlzJC2uzIU/hqdefault.jpg



Download the start file here: http://www.cgmasters.net/tutorials/jeep/jeep_rim_start.blend
See more about “Complete Vehicle Production in Blender” here: https://gumroad.com/l/vehicle-production

This tutorial is a free chapter from my training course “Complete Vehicle Production in Blender”. In this tutorial we’ll be modeling the rim for a Jeep Wrangler. You’ll learn hard surface modeling techniques, the importance of a systematic approach for objects with symmetry, using snapping tools and “guide meshes” for curved surfaces, and you’ll end up with an accurate result with perfect topology.

Music for the trailer is by Kevin MacLeod (incompetech.com) and shared under Creative Commons 3.0 Attribution

source

3d Ocean

Related Posts

41 Comments

  1. Steven B
    September 29, 2017 at 02:55

    My result https://skfb.ly/66xtx

    Good luck to everyone else watching!

  2. Ganapathy M
    September 29, 2017 at 02:55

    Your Skills are Great, Plz tell me what are the things that i have to kept in mind before start modeling anything, and also tell me from where did you learn all these things and how long did it take to you to be with this immense skills

  3. Ganapathy M
    September 29, 2017 at 02:55

    Thank you

  4. Oskar Bravo
    September 29, 2017 at 02:55

    Damn! Ninja Skills!

  5. Skips
    September 29, 2017 at 02:55

    41:23 "removed 666 vertices"

  6. Lucas C.
    September 29, 2017 at 02:55

    i felt like i was watching Bob Ross, lol

  7. El Pechero
    September 29, 2017 at 02:55

    The link is broken, i can't download the blueprints 🙁

  8. KceenHD
    September 29, 2017 at 02:55

    When you think you're not so bad at modeling, and then you see this guy xD

  9. xOverload86x
    September 29, 2017 at 02:55

    @blengine 0:56 9:28 13:50 How is it your tool shelf reverts to the default 32 vertices automagically? If I add a circle, change it's vertcount to 50 and then later add another one, it will be on 50 verts as well, unless i change it manually. Same goes for every other such tool, like inset faces, remove doubles, etc

    How can I change that behavior?

  10. Glynn Gore
    September 29, 2017 at 02:55

    Hi, I'm no expert in Blender, but couldn't you use the 'trace bitmap' function in Inkscape (free) to generate a set of editable Bezier curves from the blueprint, then export this as a standard .svg file which can be imported into Blender?

  11. Flashlight _
    September 29, 2017 at 02:55

    period and comma key ? for my german keyboard this doesnt seem to work :(((((((

  12. Stuntkoala
    September 29, 2017 at 02:55

    Aaah this topology is so spicy O: Awesome Tutorial!

  13. Be Ka
    September 29, 2017 at 02:55

    That video convinced me to buy this course. Thanks a lot for sharing.

  14. ga kohan
    September 29, 2017 at 02:55

    http://pasteall.org/blend/index.php?id=47023

    Chris – another version.

  15. Or4ANGEpm
    September 29, 2017 at 02:55

    This is pretty good!

  16. ga kohan
    September 29, 2017 at 02:55

    Unable to snap to irregular surface 17:31.

  17. ga kohan
    September 29, 2017 at 02:55

    Great intro – although lacks screen cast keys to be able to follow along…
    -gake

  18. Bruno Santis
    September 29, 2017 at 02:55

    sou do brasil, poderia ter legendas em pt br o curso pago

  19. Demonic Arts
    September 29, 2017 at 02:55

    A very nice Tutorial 😉

  20. howiemnet
    September 29, 2017 at 02:55

    Wow. Thanks, Chris. Hugely informative.

  21. Rombout Versluijs
    September 29, 2017 at 02:55

    PS shift + R is very usefull to repeat last action. For example when you merge 2 verts doing it by the menu each time takes way more time then simply select them and shift+R to repeat last merge action.

  22. Tjeb van Kleef
    September 29, 2017 at 02:55

    Thank you for this one. I'm pretty pleased about the result.
    (Result can be seen on my deviantART page.)
    As a challenge, I'm now working on an animation (other software) to see if you can animate,
    not just the rotation, but the sort of 'bubble' there always seems to be because of the weight of the vehicle.

  23. chrellomation
    September 29, 2017 at 02:55

    Dude, I life in Germany and there it costs $53, because of the taxes. 😟

  24. David Fabris
    September 29, 2017 at 02:55

    I have to say that the tutorial series is one of the best I have come across and worth every penny , I learn't more in 48 hrs than I have in the 6 months I have been dabbleing with Blender. well done 🙂
    One issue that will continue to crop up though is a -0.006 offset that is needed to be added to the front and rear views without that offset mirroring is a disaster. A minor fix but anyone buying the course should be made aware of before starting to work on the model they should place a cube around the images this shows how much offset may be needed.

  25. NightmareTiger
    September 29, 2017 at 02:55

    dude, I cringe when you freehand stuff that needs symmetry, just use a mirror modifier that is rotated with an empty!

  26. Prashan Subasinghe
    September 29, 2017 at 02:55

    Fantastic tutorial! about 70% of the way and still at it. Hey Chris, do you ever look at a real world object and think "I think that needs another edge loop"?

  27. zogolov anak
    September 29, 2017 at 02:55

    great car thank you for this tutorial

  28. damonyo tropa
    September 29, 2017 at 02:55

    I cant snap the vertices to the face of the guide 17:30 .. Set it to face and enabled rotaion.. but i wont snap to the face of the 2nd object.. pls help..

  29. Asdayasman
    September 29, 2017 at 02:55

    How come you didn't use an array modifier offset by a rotated empty object, instead of a spin? Would let you rotationally symmetrically work on your mesh still.

  30. Nico
    September 29, 2017 at 02:55

    im bad in english and i don't understand your pronunciation about the key to type before the S to scale the vertices @3,27 the coma key ? the command key ? the ok micky ? how do you switch between this two kind of scaling ? thx

  31. 哈利陳
    September 29, 2017 at 02:55

    I am a PC user and I don`t how can you scale toward to between 3D cursor and Bounding box center ,use what hotkey to change scale pivot center mode?It`s a Great tutorial and I want to buy it,but is it suitable for the PC user?

  32. KrisRenz
    September 29, 2017 at 02:55

    Please can anyone help me?
    I appreciate every video you guys make though some are not free and I can't afford :(. Every video like these are gold. You guys deserve money.

    is there any tutorial I can find how to make this Ninja's goggles animation simulating? https://youtu.be/rgsusYeNj8A?t=43s

    like when he moves, the goggles moves –> sorry for my english, I can't express this, I can't find the right words. Please I appreicate a reply, I've been looking all over the Internet and I can't find answers 🙁

    I want to make a character with gun in his pocket but the gun also moves independently not parented to his thigh.

  33. Shamy R
    September 29, 2017 at 02:55

    That's genius
    All of these little shortcuts and techniques are just awesome

  34. TorSkywalker
    September 29, 2017 at 02:55

    Looks awesome!
    One question: why did you choose to "manually" mirror and rotate instead of using the mirror / array modifier with a 72° rotated empty object? Wouldn't that make it easier to edit the model later if you spot any errors or want to change anything?

  35. Эфенди Садыйков
    September 29, 2017 at 02:55

    (32:32) Shift+R – Repeat the previous operation, so faster

  36. Paul Fieduna
    September 29, 2017 at 02:55

    Wow! Dude this tutorial blows my mind. Thanks!

  37. Onur Oğuz
    September 29, 2017 at 02:55

    at minute about 17. I am selecting inverse with ctrl-İ but it selects all of the objects. i m stuck.

  38. Bret Wills
    September 29, 2017 at 02:55

    Love the video. Very helpful. I ordered the course and am very happy with it so far.

  39. Accelerator
    September 29, 2017 at 02:55

    Amazing

  40. Ryan Cooper
    September 29, 2017 at 02:55

    Superb tutorial, definitely a series I'll be purchasing 🙂
    Even after 8+ years in blender I learnt 3 bee things in this tutorial that I never knew existed, can't wait to see what I learn from the full series 🙂

  41. Cameron Jackson
    September 29, 2017 at 02:55

    Is there a tool in Blender, or a script or plugin I can download, that will do the same thing, or close to it, as the SetFlow tool in MAX? I want to retain the curvature of my model.

Leave A Comment

You must be logged in to post a comment.