• Tuesday , 26 May 2020

Tutorial: Render Solid Wire-Frames In Blender in under 5 min

Code Canyon

https://i.ytimg.com/vi/C6a9FnHlqjo/hqdefault.jpg



A quick Blender tutorial on creating solid wire-frame renders. (More info below)
My website: http://www.deniszholob.com

Tutorial website link: http://deniszholob.99k.org/tutorials/render-wireframes/
(Download files here)
Also on Vimeo: http://vimeo.com/34813262

Tutorial Level: Beginner
This tutorial covers:
*Solid Wire-frame Material setup
*Lighting/Backdrop

Quick Bookmarks:
Materials: 0:38 __ Backdrop: 2:24 __ Lighting and AO: 3:31

Note: This is very simple lighting, which you can change for even better results.
—*Change the secular intensity on the Solid material as you see fit, but i should be quite low.
—*Change the Alpha value as well in the Wire material. Value of 1 gives thick lines and lower values give thinner lines.
—*A value of .04 for z-offset may or may not work perfectly depending on the size and density of your model, so change that as you see fit, but it should be quite low.

Blender Artists Thread: http://blenderartists.org/forum/showthread.php?242056-Tutorial-Render-Solid-Wire-Frames-In-Blender-Under-5-min&highlight=

source

3d Ocean

Related Posts

17 Comments

  1. Asand Catena
    April 29, 2019 at 07:56

    thanks, your tutorial very very help me well, 😀

  2. Obex
    April 29, 2019 at 07:56

    Thanks for this video 🙂 It was a great help.

  3. Fred Morawiec
    April 29, 2019 at 07:56

    Great tutorial. Works just fine. Thanks a lot !

  4. Denis Zholob - Cinematography / Flight
    April 29, 2019 at 07:56

    Yes it is working in 2.65, make sure you go into edit-mode (default is "TAB-Key") The assign, select and deselect buttons show up then. Once there make sure to select all the vertices before you hit the assign button. Hope that helps, let me know if it doesn't.

  5. beat nebo
    April 29, 2019 at 07:56

    is this working in 2.65? because, I can't make it work… I followed all the steps, except "assign" stuff, because there is no such thing in 2.65, whatever I do, assign button does not show up, hmh…

  6. Abraham Morales
    April 29, 2019 at 07:56

    Absolutely! I'll send you a link through a PM here.

  7. Denis Zholob - Cinematography / Flight
    April 29, 2019 at 07:56

    Glad it worked, any chance I can see the result?

  8. Abraham Morales
    April 29, 2019 at 07:56

    That did it! Thank you so much!

  9. Denis Zholob - Cinematography / Flight
    April 29, 2019 at 07:56

    I am guessing you are trying to render the tube as a wire-frame? If so convert from Bezier Curves to a mesh object (Alt – C), then apply my settings. Hope that helps!

  10. Abraham Morales
    April 29, 2019 at 07:56

    Great tutorial, thanks, but for some reason, this isn't working for me. I'm trying to render an animation inside a tube created with Bezier Curves and the camera is inside the tube. Any tips?

  11. Denis Zholob - Cinematography / Flight
    April 29, 2019 at 07:56

    Yeah that switch up got me too at first, that is mainly why i made this tut since without the swap it doesn't work.

  12. Denis Zholob - Cinematography / Flight
    April 29, 2019 at 07:56

    Yeah, this should actually render faster since you only have one mesh, but definitely easier to manage, since you don't have to worry about duplicate objects floating around in your scene.

  13. Philippe M. MeshWeaver
    April 29, 2019 at 07:56

    …and here I was, still using the mesh-duplication method from BlenderCookie. Thanks for vid, DDD! I'll definitely be using this method in the future 🙂

  14. sp pro
    April 29, 2019 at 07:56

    Two Thumbs up for Susan !!

  15. Denis Zholob - Cinematography / Flight
    April 29, 2019 at 07:56

    F12 is the default

  16. funnyflix2
    April 29, 2019 at 07:56

    What key did you press to render it?

  17. Spencer Dupre
    April 29, 2019 at 07:56

    Great tutorial, thanks for sharing!

Leave A Comment

You must be logged in to post a comment.